J-A5816, 15" Variable Speed Floor Model Drill Press 115/230V 1Ph

Stock Number
354550

J-A5816, 15" Variable Speed Floor Model Drill Press 115/230V 1Ph

These JET Drill Presses use a variable-speed motor with the stepped-pulley system, and come equipped with a continuously variable transmission. This enables use at a wide range of speeds, as well as the ability to change speed during operation. A scale-marked hand wheel that matches the desired machine speed is mounted to a reduction gearing system for precise operator control. This adjusts the gearing ratio between the motor's fixed pulley and the output shaft's variable pulley, changing the speed of the chuck. A tensioner pulley is implemented in the belt transmission to take up or release the slack in the belt as the speed changes.

1/2" Drill chuck and arbor included
3" column diameter for maximum head support
6" stroke for deep hole application
Full bearing support on quill for maximum spindle stiffness
Handwheel speed adjustment of 400 to 5,000 RPM
Large 2-1/4" quill for greater accuracy
More Information
Stock Number354550
Base Dimensions (In.)20-7/16 x 14-3/16
Base Work Table (In.)12-1/8 x 11-13/16
Column Diameter (In.)3
Distance Column to Spindle (In.)7-1/2
Drilling Capacity Cast Iron (In.)5/8
Drilling Capacity Mild Steel (In.)1/2
Drills to Center of Circle (In.)15
Motor (HP)1 HP, 115/230V, 1Ph
Overall Dimensions (L x W x H) (In.)30 x 20 x 71
Prop 65Cancer and Reproductive Harm
Range of Spindle Speeds (RPM)400 - 5,000
Spindle Distance to Base (In.)44-1/2
Spindle Distance to Table (Max.) (In.)25-3/4
Spindle Taper (In. x TPI)MT-2
Spindle Travel (In.)6
Style (Type)Variable
T-Slot Centers (In.)5-5/16
T-Slots Number and Size (In.)2 and 1/2
Table Size (L x W) (In.)15 x 18
Table Travel (In.)16-3/4
Weight (Lbs.)426
Work Table Weight Capacity (Lbs.)90
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Print / DownloadPrint / Download